MT-02-04-B3
Stainless steel Drawing Rib, Angle Edge #3 · Bean shape - concave and convex arcs on one rib · Wide surface for smooth, controlled contact · Works the inside and outside of a form · 44 × 102 mm (1.75 × 4 in)
$0
A stainless Drawing Bean rib with the angle edge #3, 44 × 102 mm (1.75 × 4 in). The Bean carries both concave and convex arcs, so one rib works inside and outside a form.
The Bean is concave on one side and convex on the other, with a broad surface that keeps smooth and controlled contact with the clay. That makes it a refining rib first - truing a wall, levelling a curve - while the cut edge lets you drag texture into the same pass. This one carries the angle edge #3. Stainless steel, 44 × 102 mm (1.75 × 4 in). Mudtools makes the Drawing Ribs in three shapes and five edges: #0 smooth, #1 organic, #2 wave, #3 angle and #4 tight wave. The edge number is not a firmness or a size - it is the profile cut into the working edge, and it is what changes the mark.
